BAL's NEW floor levellers
If you need to level floors, BAL's new leveller range offers fantastic flow, brilliant bonding, virtually no shrinkage and great self-healing. A range for any situation; indoors or out, from concrete to timber, feather edge to 50mm, use with underfloor heating, fast drying or slower drying.
All products:
- Are protein free
- Have built in polymer
- Have virtually no shrinkage
- Self healing which helps to deliver an improved finish
- Have high bond strength
- Have a consistent flow; they deliver the same flow across a 15 minute time period after mixing
- The range has bed depths from feather edge to 50mm
- Are guaranteed for 25 years
Want to see them in action, then view the Fibrebase video - they are so easy to use and the results are fantastic
For a 'at a glance comparison' of the this new range, see this table.
| BAL SOLIDBASE | BAL RAPIDBASE | BAL THICKBASE | BAL FIBREBASE | ACRYBASE | |
| Minimum bed depth | 2mm | Feather edge | 2mm | 3mm | Feather edge |
| Maximium bed depth | 12mm | 15mm | 50mm | 30mm | 10mm (20mm with chippings) |
| Time to foot traffic | 4 hours | 90mins | 3-4 hours | 3 hours | 3 hours |
| Time to accept ceramic tiles | 4 hours | 2-3 hours | 3-4 hours | 4 hours | 4 hours |
| Mix ratio | 5:1 | 5:1 | 6:1 | 5:1 | 23.5kg powder : 5 litre liquid |
| Coverage mm/m2 | 1.6-1.7kg | 1.6kg | 1.7kg | 1.6kg | 1.9kg |
| Flow time | >15mins | >15mins | >15mins | >15mins | >15mins |
| Pack size | 20kg | 20kg | 20kg | 20kg | 23.5kg powder : 5 litre liquid |
| Built in Polymer | Yes | Yes | Yes | Yes | No |
| Protein free | Yes | Yes | Yes | Yes | Yes |
| Suitable surfaces: | |||||
| Concrete |  |
|
|
|
|
| Cement:sand screed | |
|
|
|
|
| Terrazzo & natural stone | |
|
|
|
|
| Quarry tiles | |
|
|
|
|
| Unglazed ceramic tiles | |
|
|
|
|
| Asphalt |  |
|
|
|
|
| Anhydrite screed | |
|
|
|
|
| Timber floors | |
|
|
* |
** |
| Underfloor heating | |
|
|
|
|
| Tested to: | |||||
| EN 13872:2004 for shrinkage | |
|
|
|
|
| EN 13892-2002 for compressive strength | |
|
|
|
|
| EN 12706:2000 for flow | |
|
|
|
|
| EN 13408:2002 for bond strength | |
|
|
|
|
* For tongue & groove flooring and 18mm single layer plywood - use with BAL 4x4mm Fibreglass Mesh (1x10m roll)
** Contact BAL Technical Advisory Service 9045 600 1222
Note: Refer to Technical Data Sheets for specific product usage
For specific product information see: