Tilerworld forum
Perfect ready-mix adhesive for internal wall tiles

Perfect ready-mix adhesive for internal wall tiles

BAL White Star is the ideal ready-mixed adhesive for internal wall tiling, being perfect for a wide range of applications. Its suitability for so many wall backgrounds makes it the “fixers’ friend” among ready-mixed adhesives. Many professional tilers routinely keep a tub or two on hand, knowing that its versatility can remove the need for a trip to their distributor. “Sooner or later,” said one experienced fixer, “you will be using BAL White Star.”

The white organic dispersion adhesive is classified D2TE and offers a strong bond with a variety of ceramic wall tiles and mosaics, including lighter coloured natural stone.It can be used on a wide range of backgrounds including plasterboard, plaster, cement:sand rendering, existing ceramic tiles, tile backboards, worktops and wooden backgrounds, With any of these, grouting can begin just 24 hours after tiling.

BAL White Star is non-slip and highly water-resistant and can be used in all types of dry and wet environment in domestic and commercial buildings, including communal showers and commercial kitchens. A single 10 litre tub can cover up to 6.6 square metres of dry wall.

As with all BAL products, BAL White Star adhesive carries a full 25-year guarantee. It is available in distinctive 2.5 litre, 5 litre and 10 litre tubs from more than 500 authorised distributors nationwide.

-  E N D S  -

For further advice and precise information, visit the BAL website at
www.bal-adhesives.com

or call 0845 600 1222

Back to Media Centre